Introduction to the specifications of several main three-proof lamps
Demand. Three-proof lamp types: anti-glare three-proof lamp, high-efficiency mirror three-proof lamp, three-proof fluorescent lamp. LED three-proof lamp is very energy-saving, it belongs to DC drive, the power consumption is very low, under the same lighting effect, LED three-proof lamp is at least 80% more energy-saving than the traditional light source.
Three defenses: waterproof, dustproof and anticorrosive. The protection grade of the three-proof lamp is generally IP6. The three-proof lamp is mainly used in indoor and outdoor and wet places. For example, parking lots, warehousing, swimming pools, kitchens, food factories and tunnels, bridges, saunas and other occasions with special requirements for waterproof, dustproof, anti-corrosion and so on.
It mainly includes mobile explosion-proof lamps, safety explosion-proof lamps and lanterns, flameproof lamps and lanterns. In general, explosion-proof lamps and lanterns are mainly used in flammable and explosive places.
Millimeters. Civil air defense light box wire model specification is 440mm, civil air defense AS light box, also known as civil air defense three anti-light, it is mainly used for engineering bunker internal air quality display and alarm, so that users can quickly and directly understand the air conditions inside the civil air defense project. To reflect the electronic signal of the alarm from the control cabinet.
Introduction to installation and maintenance of three-proof Lamp
1. Dampness can easily lead to rust and paint loss of lamps and lanterns, and shorten the service life of lamps and lanterns. Therefore, moistureproof is the key to lighting maintenance, especially in toilets, bathroom lamps and kitchen headlights, moisture-proof lampshades should be installed to prevent moisture invasion and avoid corrosion damage or leakage short circuit.
2. There are usually two ways to install the three-proof lamp: suspension installation, in the process of installation, the lifting transfer plate is fixed on the lamp with bolts, and then the cable is connected to the lamp. Tighten it with the pipe thread of the lamp and the wiring steel pipe with standard pipe thread.
3. The three-proof lamp is mainly used in highway tunnels, food factories, pharmaceutical factories, hospitals and other humid environments, especially in dusty environments, which plays an important role in safe production.
How to distinguish the material of the three-proof lamp
Three defenses: waterproof, dustproof and anticorrosive. The protection grade of the three-proof lamp is generally IP6. The three-proof lamp is mainly used in indoor and outdoor and wet places. For example, parking lots, warehousing, swimming pools, kitchens, food factories and tunnels, bridges, saunas and other occasions with special requirements for waterproof, dustproof, anti-corrosion and so on.
Aluminum alloy + toughened glass. The three-proof lamp is a kind of lamp with the functions of waterproof, dust-proof and anti-corrosion. its chassis is made of aluminum alloy and toughened glass, which has the characteristics of high temperature resistance, anti-aging and anti-corrosion, so that the three-proof lamp can achieve complete protection. Widely used in seaside, high-temperature desert and other areas.
The difference between the three-proof lamp and the ceiling lamp. Three-proof lamp definition: three-proof lamp refers to: waterproof, dustproof, anticorrosive these three defenses. Ceiling lamp is a kind of lamp, as the name implies, because the top of the lamp is relatively flat, the bottom is completely attached to the roof during installation, so it is called ceiling lamp.
Lighting environment. Three-proof lamp refers to: waterproof, dustproof, anticorrosive these three defenses.
What is the difference between the three-proof lamp and the LED lamp
1. The three-proof lamp is a kind of special lighting lamp made of special protective materials with the functions of dust-proof, waterproof and explosion-proof (anti-corrosion). This lamp must carry out dust-proof, waterproof and explosion-proof (anti-corrosion) treatment on the bulb and circuit. If the LED lamp is dustproof, waterproof and explosion-proof (anti-corrosion), it can be used as a three-proof lamp.
2. Compared with ordinary lighting, LED three-proof lamp has the following advantages: LED environmental protection: there is no ultraviolet and infrared in LED spectrum, low heat and no strobe, no strobe can protect eyesight, and waste can be recycled, no pollution, no mercury and other harmful elements, can be safely touched, the real green lighting source.
3. The difference between the three-proof lamp and the ceiling lamp. Three-proof lamp definition: three-proof lamp refers to: waterproof, dustproof, anticorrosive these three defenses. Ceiling lamp is a kind of lamp, as the name implies, because the top of the lamp is relatively flat, the bottom is completely attached to the roof during installation, so it is called ceiling lamp.
The difference between LED three-proof Lamp and LED Clean Lamp
There is little difference, it can be said that there is no difference in appearance, this is the name of different people or the concept hyped by some people.
Although LED clean lamps and LED clean lamps are used in the field of dust-free cleaning. Both use LED light beads as the light source, and the energy-saving effects of the two are almost the same. But the effects of the two are really different. The main purpose of LED clean lamp is to prevent the entry of dust from the indoor effect installed.
The main difference between the two is that LED panel lamp is an energy-saving lighting lamp used in ceiling assembly, while LED purification lamp, in addition to luminous brightness requirements, for installation, surface treatment also has great requirements, mainly used in high-standard dust-free clean room, Baidu answer you.
Led flat panel purification lamp can also remove all kinds of odors in life; can quickly eliminate smoke in the air; can achieve the effect of energy saving, saving more than 80% than ordinary lamps; it has the advantages of relatively smooth surface, and relatively easy to clean up dust-free, and can be anticorrosive. It is mostly used in purification projects, such as clean rooms, etc.
Three-proof lamp is an ordinary daylight three-proof lamp, the application is more extensive than the other two types of lamps, and Putong fluorescent lamp in general, LED three-proof lamp is actually equivalent to the modified T8 three-proof lamp, but the wiring is somewhat different, there is no ballast, it is directly installed with the same specification of LED fluorescent lamp.
Different application places: LED explosion-proof lamp is mainly installed and used in dangerous places where explosive gases exist, with a certain degree of danger, while LED lamp is mainly used in living places and non-dangerous industrial places, relatively speaking, the place where LED lamp is installed and used is relatively safe.
What is the LED three-proof light?
The so-called three defenses are waterproof, dustproof and anticorrosive. This kind of lamp has a very good energy-saving effect, and the brightness is also very good, so it is very popular in the market. The reason why the three anti-lighting can play a protective role, mainly depends on the silicone sealing ring and anti-oxidation and anti-corrosion of these two materials, after use can better protect the safety of the circuit.
The three-proof lamp is a kind of special lighting lamp made of special protective materials with dust-proof, waterproof and explosion-proof (anti-corrosion) functions. this lamp must carry out dust-proof, waterproof and explosion-proof (anti-corrosion) treatment on the bulb and circuit. If the LED lamp is dustproof, waterproof and explosion-proof (anti-corrosion), it can be used as a three-proof lamp.
What is the three-proof light? The three-proof lamp is mainly used for factory lighting products, for factory lighting needs to overcome ambient temperature, humidity, vibration, pollution, dust, corrosion. There is a dangerous medium for explosion and fire, so the three-proof lamp is not an ordinary lighting lamp.
LED three-proof lamp is very energy-saving, it belongs to DC drive, the power consumption is very low, under the same lighting effect, LED three-proof lamp is at least 80% more energy-saving than the traditional light source.
