The process of making lanterns
Fold the red paper in half laterally. Use safety scissors to cut the red paper equidistant from the fold. Fold a small part of the yellow paper horizontally and tear it off. The restThe drawing paper is rolled up along the long edge. Secure the opening with a stapler. You can also replace the stapler in this step with white latex or glue stick.
The process of making the lantern is as follows: prepare a rectangular piece of white paperDraw your favorite picture on it. Fold the white paper like a folding fan, facing outward. Unfold the folded paper to form a cylinder and glue the joint with glue. There’s nothing to it.
First prepare scissors, red and pink paper jams (more sheets are needed for beginners); take out a piece of red paper jam and fold it in half neatly; then cut the paper jam along the “paper spine” and finally set aside 5cm.
First of all, prepare the materials needed to make straw lanterns: disposable cups, straws, scissors, leather bands, art knives, rope, first cut off the upper edge of the disposable cup with scissors, and then use the art knife _ disposable cup to make a hole in the bottom. pierce the rope through the hole at the bottom of the disposable water cup.
Draw several vertical lines of the same size in the middle to avoid complete cutting and squeeze the middle part to form a square shape. Cut off the left and right strips on the back of the red packet. Paste the cover of the red packet just now. Roll up the red packet and glue it. The long strip just cut is glued to the lantern.
Lighting design
Functional principle people will have different feelings in different environments, and human eyes will have different psychological feelings about light, shade and color.
The lighting design in the exhibition hall can present the color, light spot, projection shape and other elements of the light artistically, set off the halo phase, and form a rich and colorful decorative design effect, so as to improve the appeal and appeal of the interior space. It can not only attract the attention of exhibitors, but also greatly conducive to corporate image publicity and enhance recognition.
Lighting design principle 1) aesthetic principle lighting design is an important means to decorate, beautify the environment and create an artistic atmosphere. In order to decorate and beautify the space, increase the sense of space layers and render the corresponding space atmosphere, it is very important to use decorative lighting.
Indirect lighting can be said to be a more flexible and interesting design element, can become the catalyst of the atmosphere, is the focus and theme of the room, but also can enhance the hierarchical sense of the existing decoration. Generally speaking, lighting arrangement can be divided into direct and indirect.
The process of making lanterns
StepsUse bamboo branches. Or bamboo strips as skeletons.First of all, put the bamboo branchesBamboo strips soaked with waterIt can be used only after drinking water thoroughly. It is usually square or cylindrical. The junctions of the bamboo branches are fastened with iron wire. Cut white and red paper to the size of a skeleton, as much as possible.
The process of making lanterns is as follows: prepare a piece of rectangular white paper and draw your favorite pictures on it. Fold the white paper like a folding fan, facing outward. Unfold the folded paper to form a cylinder and glue the joint with glue. There’s nothing to it.
First of all, prepare the materials needed to make straw lanterns: disposable cups, straws, scissors, leather bands, art knives, rope, first cut off the upper edge of the disposable cup with scissors, and then use the art knife _ disposable cup to make a hole in the bottom. pierce the rope through the hole at the bottom of the disposable water cup.
What is the process of producing headlights?
1. The first stage is the market research stage. This is a crucial step, because it can easily cost hundreds of millions of yuan to build a car. If you don’t do market research, the car you make will not be popular in the market. The second stage is conceptual design.
2. The equipment and process raw materials needed for LED production. Wafers (depending on the luminous color, the unit price is also different, generally a few cents, high brightness is a little more expensive), gold thread (pure gold, only a few grams in a roll), glue (for packaging), bracket (divided into 20 conjoined, 30 conjoined, 40 conjoined and SMD series) crystal fixing machine.
3. The main raw material for the production of LED lights: the LED light guide plate, which refracts the side LED light through the dot so that the light is uniformly derived from the front. The light guide plate is the key point of the quality control of LED panel lights.
Effect drawing production process
1. First open a decoration file to be made, and create a new layer. Then select the Pen tool in the toolbar and draw a path where the decoration is made. Select the Brush tool in the toolbar, change its size to 40, and set the color of the effect we want to decorate.
2. Open the 3dmax software to create a new file and draw a simple scene in the perspective view. Here we use three spheres as a scene to make the effect picture. The steps are to attach the initial material to the 3dmax model. Here I use the rendering plug-in Vray to make the rendering of the wall and ground sphere more realistic.
3, click the (file) (output) command in the menu bar, pop up the file selection box, and select the file in DWG format, the dialog box will pop up (AutoCAD DWG/DXF input options). Then press OK to open it.
