Is the lighting fixture of led workshop good? How to choose and buy workshop lighting fixtures?
In particular, it is necessary to consider the shade brought by the equipment in the workshop equipped with tall machine tools, which affects the uniformity of ground illuminance. Choosing lamps with a small distance to height ratio can avoid this problem. The light intensity under the lamp should be considered that the illuminance produced by the light intensity under the lamp should meet the illuminance requirements of the main working face of the workshop.
At this time, you can choose lamps and lanterns suitable for the family according to your own preferences. If it doesn’t matter, you can choose and buy them at will. However, in the selection and purchase, we must pay attention to the quality of LED lighting, which is a direct impact on future life, but also affects the life of lamps and lanterns and the effect of lighting.
Compared with the traditional explosion-proof lamp, LED explosion-proof lamp has smaller size, lighter weight, longer life and moderate price, which has won the satisfaction of users. The design institute considers the overall quality, safety performance and cost control of the project, so choosing the mature LED explosion-proof lamp is the only way.
What is the best lamp for lighting in the factory workshop
1. The type of lamp should be determined according to the ceiling height of the factory. For those with a ceiling below 4m, it is recommended to install LED flat panel lights or LED grille lights, and for those with no ceiling, it is recommended to install suspended LED lamps with supports; for those with a height above 4m, it is recommended to install LED industrial and mining lamps or factory lights with a larger luminous angle.
2, the higher part of the workshop can use LED spotlight, LED industrial and mining lamp, lower place can use LED three anti-lamp (waterproof, dustproof, anticorrosive), need explosion-proof condition to use LED explosion-proof lamp.
Today, the editor will recommend some brands of factory lighting l e d lights, these brands are strong lighting. LED lights that last for a long time. Let’s follow in the editor’s footsteps and have a look.
4. (5) compared with incandescent lamps, energy-saving lamps have the advantages of energy saving and power saving. LED lamp: (1) Energy saving. The energy consumption of white LED is only 10 times that of incandescent lamps and 4 times that of energy-saving lamps. (2) longevity. Life span can reach more than 100000 hours, lighting for ordinary homes can be described as once and for all. (3) it can work at high speed.
5. At present, new office buildings, electronics factories and pharmaceutical factories are gradually using LED lights, LED panel lights, LED downlights, etc., and the proportion has been improved. It is expected that LED panel lights will enter the field of popular lighting in an all-round way.
Workshop lighting needs how to pay attention to the choice of led lights?
1. Waterproofing mainly depends on the specific needs, mainly considering the humidity in the workshop, such as the humidity in the southern Huangmei workshop is higher, and the lamps and lanterns with IP44 or above can be selected in some special workshops with high humidity.
2. It is best to have a thermometer and measure it. If the temperature of the radiator is about 60 degrees, it will be dangerous above 65 degrees.
3. Temperature brightness test purchase Test LED lamp tube under normal irradiation, the temperature increases gradually. If the sudden heating life will not be well guaranteed, the brightness will not be dazzling and stroboscopic irradiation will be uniform.
4. Secondly, we should know that if the LED industrial and mining lamp has a brighter and wider lighting effect, the outer cover must be coated with white, while the reflector is made of special glass material, which will make the effect better.
5. Is the lighting of led workshop good? Soft light, high brightness, 60, 90, 120 beam angle optional. Meet the lighting needs of factories of different heights.
Which lamp is the best for factory workshop lighting and which kind of lamp is suitable for workshop lighting?
1. The type of lamp should be determined according to the ceiling height of the factory. For those with a ceiling below 4m, it is recommended to install LED flat panel lights or LED grille lights, and for those with no ceiling, it is recommended to install suspended LED lamps with supports; for those with a height above 4m, it is recommended to install LED industrial and mining lamps or factory lights with a larger luminous angle.
2. The factory workshop is best illuminated by low-frequency induction lamps. Lamp: lighting articles, generally referring to utensils that can be illuminated. In ancient times, man was illuminated by torches, followed by candles and oil lamps.
3. At present, new office buildings, electronics factories and pharmaceutical factories are gradually using LED lights, LED panel lights, LED downlights, etc., and the proportion has been improved. It is expected that LED panel lights will enter the field of popular lighting in an all-round way.
4. LED lamp: (1) Energy saving. The energy consumption of white LED is only 10 times that of incandescent lamps and 4 times that of energy-saving lamps. (2) longevity. Life span can reach more than 100000 hours, lighting for ordinary homes can be described as once and for all. (3) it can work at high speed. If the energy-saving lamp is turned on or off frequently, the filament will blacken and break quickly.
5. General factory lighting uses LED hanging lights, which can also be called industrial and mining lamps. The kind with a reflector has a power of more than 50-300W. Domestic Reishi, Opp, Qiya and Sanxiong Aurora all have this kind of lamps and lanterns.
6, of course, choose LED industrial and mining lamp, LED is more energy-saving and power-saving, but there is one thing to pay attention to: factory lighting is used for a long time, we must choose LED lamps with good heat dissipation effect, otherwise the life is short.
What are the requirements of LED lights for workshop lighting?
Area-the larger the area, the more lamps are used, depending on the density. Many people’s row lights will be 4m high-the higher the plant height, the greater the power of the led lamp theoretically-if it is the aisle area, you can choose to have less power. The power is higher in production operations.
Temperature brightness test buy test LED lamp under normal irradiation, the temperature increases gradually. If the sudden heating life will not be well guaranteed, the brightness will not be dazzling and stroboscopic irradiation will be uniform.
The power of LED industrial and mining lamp is only 20% of that of sodium lamp, which is equivalent to 100W LED industrial and mining lamp can replace 500W sodium lamp. It has good color rendering, energy saving, wide starting voltage and no strobe. The lighting of the electronic industry factory building requires better color rendering to meet the reduction of the original color of the object, especially in the production and testing area.
Heat dissipation directly determines the life of the lighting LED lamp in the workshop. The heat dissipation material of the lamp is generally glass brazing plate and aluminum substrate, and the effect of the latter is better. High quality aluminum substrates also have thermal conductivity of 2.
Plant height, lumen, color temperature requirements, if the working area must see the color, then the color temperature can not be too low, because the color temperature is too low yellow light, some things can not see the color clearly. Determine the height of the plant in order to know how many watts of industrial and mining lamps to use.
How to choose the LED lighting tube of the factory building?
-3 elements are about the performance of lamps and lanterns, we must choose the LED products of regular manufacturers, basically there will be no problems.
How to choose led lamps and lanterns to consider the hue of lights according to the region, choose cold or warm led lamps and lanterns. Consider the effect of lighting according to the size of the area, choose lamps and lanterns power and lighting effect, for darker places, you can choose led lamps and lanterns with strong lighting effect.
Choose and buy shape lamp tube shape milky white, uniform size 2m is the most commonly used. When buying, it depends on whether the joint of the product has the trace of crack and extrusion deformation, and the material of aluminum-plastic all-plastic glass should be selected according to the specific requirements.
Heat dissipation directly determines the life of the lighting LED lamp in the workshop. The heat dissipation material of the lamp is generally glass brazing plate and aluminum substrate, and the effect of the latter is better. High quality aluminum substrates also have thermal conductivity of 2.
Compared with ordinary lamps, the price of this kind of products is much higher, while the application is also relatively small, mainly in urban lighting projects and decoration projects, another power supply is also a big problem, the current LED lamps and lanterns can only use low-voltage DC, so in the use, there must be AC into DC power supply.
