What are the requirements of LED lights for workshop lighting?
Area-the larger the area, the more lamps are used, depending on the density. Many people’s row lights will be 4m high-the higher the plant height, the greater the power of the led lamp theoretically-if it is the aisle area, you can choose to have less power. The power is higher in production operations.
According to the national requirements of the normal LED lamp body has logo logo, power, voltage range, factory date and other instructions, regular manufacturers these data is essential.
The power of LED industrial and mining lamp is only 20% of that of sodium lamp, which is equivalent to 100W LED industrial and mining lamp can replace 500W sodium lamp. It has good color rendering, energy saving, wide starting voltage and no strobe. The lighting of the electronic industry factory building requires better color rendering to meet the reduction of the original color of the object, especially in the production and testing area.
Heat dissipation directly determines the life of the lighting LED lamp in the workshop. The heat dissipation material of the lamp is generally glass brazing plate and aluminum substrate, and the effect of the latter is better. High quality aluminum substrates also have thermal conductivity of 2.
(1): LED chip brand, capacitor, MOS,IC control chip, diode brand. (2): LED light source “electric light source test report” or “integral sphere map” (as shown below) this picture come here, look at the scarlet mark, look at two parameters: display index Ra, luminous efficiency.
Is the lighting fixture of led workshop good? Soft light, high brightness, 60, 90, 120 beam angle optional. Meet the lighting needs of factories of different heights.
Where are led industrial and mining lamps mainly used?
1. The waterproof grade of led industrial and mining lamp is generally not waterproof and is generally used indoors. The luminous angle of led industrial and mining lamp is generally local area lighting, not local emphasis lighting.
2. Industrial and mining lamps are widely used in industrial factories, production workshops, supermarkets, sports and entertainment places, warehouses and other places, it is also known as high ceiling lamp, is a high energy efficiency indoor LED lamps and lanterns. Expand small knowledge: which industrial and mining lamp installation requirements should first check whether the industrial and mining lamp is complete or not and the full range of accessories.
3. Led industrial and mining lamps are suitable for: workshops, mines, factories, shipyards, warehouses, highway toll stations, gas stations, large supermarkets, exhibition tubes, sports management and other places that need industrial and mining lighting.
4, general lighting is usually evenly arranged on the top of the workplace or on the sidewall, lighting the entire working face, need to use a larger power incandescent lamp, halogen tungsten lamp, high-intensity gas discharge lamp or a large number of fluorescent lamps, of course, there are more energy-saving high-power LED industrial and mining lamps and so on, the vast majority of industrial and mining lamps belong to this category.
What are the specific advantages of LED industrial and mining lamps for factory building lighting
1. Excellent explosion-proof performance, which can be safely used in all kinds of flammable and explosive places. 2. The excellent imported phosphor is used to achieve the advantages of low light decay, high light efficiency, energy saving and environmental protection. 3, the use of brand ballast to ensure the service life of industrial and mining lamps. 4, the use of crystal lens for light distribution, suitable for different use places.
2. LED industrial and mining lamp body adopts high-strength die-casting aluminum material, surface anti-aging static spray plastic treatment, self-cleaning and strong corrosion resistance. The use of high-quality Corey LED products, high stability, life up to 50, 000 to 50, 000 hours, more than 10 times longer than the traditional light source, achieving low investment and high return.
3, Light Illumination tells you the advantages of LED: 1) Light distribution technology expands LED point light source to surface light source, increases luminous surface, eliminates glare, sublimates visual effect, eliminates visual fatigue; 2) integrated design of lens and lampshade.
4, the brightness of 100W LED industrial and mining lamp is equivalent to that of 250W metal halide mining lamp, and the average illuminance has not weakened at all. Specific energy saving take 100 lamps and lanterns as an example, the average daily use of 10 hours, electricity charge of 1 yuan per kilowatt-hour, LED industrial and mining lamp daily electricity charge of 100 yuan, metal halide mining lamp daily electricity cost of 250 yuan.
5. LED industrial and mining lamp is very energy-saving. The industrial and mining lamp is the lamp used in the production and operation area of the factory and mine. In addition to all kinds of lights used in the usual environment, there are explosion-proof lamps and corrosion-proof lamps used in special environments, as well as industrial and mining lamps for some large high-rise buildings.
