Installation method of led flat Lamp
Embedded installation method: suitable for integrated ceiling installation, this installation method is often used in offices, stores, kitchen rooms and other occasions, but also the most common installation method, first remove a ceiling, put the driver of the LED panel lamp on the side of the ceiling, and then connect the power cord, and then put the board lights above, the installation method is relatively simple.
The first method is the simplest and most common installation method: first, take a ceiling, put the driver of the LED panel light on the next ceiling, connect the power cord, and then put the board light on it. The second method is hoisting, to use the cable.
Led flat panel lamp installation method 1 there are embedded LED flat panel lamp, ceiling type, hanging three installation methods, the first to determine which installation mode is. 2, prepare sharp nose pliers, welding, AB glue, multimeter, etc.
Embedded installation: first remove one of the ceilings, then put the driver of the led panel lamp in the surrounding ceiling, then connect the power cord, and finally embed the led panel lamp into the hole.
How to install the Led lamp after buying the lamp tube and wick, we check the accessories. Now most of the led lamps are ceiling type and will be equipped with magnet posts to fix them. Fix the magnet column to the wick, note that the magnetic surface is used to absorb the lamp holder, the direction can not be wrong.
Matters needing attention in the installation of LED flat Lamp
The first method is the simplest and most common installation method: first, take a ceiling, put the driver of the LED panel light on the next ceiling, connect the power cord, and then put the board light on it. The second method is hoisting, to use the cable.
First, choose the installation site. Indoor and outdoor places with good ventilation, non-corrosive gas, non-combustibles and less dust are suitable for the installation of LED lights. The rated voltage of the LED lamp fluctuates from + 20% to-20%, and the electronic ballast may be burned out if the rated voltage is exceeded.
Before use, it is necessary to confirm whether the product is damaged in transportation, if there is damage, it can not be installed and used. If you don’t try to repair it yourself, please let a professional engineer repair it. Materials should be kept away from children. Product small accessories, do not cause children to swallow. Let alone let children come into contact with live equipment.
Pay attention to the connection distance of the LED lamp belt. Generally speaking, the connection distance of the LED lamp belt is 20 meters. If the connection distance exceeds this distance, the LED lamp belt is easy to heat, and the service life of the LED lamp belt will be affected during use.
Which LED fluorescent lamp accessories are good?
1. Which brand of led fluorescent lamp is good for Philips lighting. Whether in terms of technical strength or brand influence, Philips should have a place to provide advanced and efficient led energy-saving lamp lighting solutions in many fields. Rex Lighting.
2. Shenzhen Langte Lighting Co., Ltd. was founded in 2003 with an investment of 50 million yuan, a state-level high-tech enterprise and a professional LED fluorescent lamp manufacturer. Guangdong top 100 led lamp manufacturers, known as “excellent LED fluorescent lamp supplier”. Led by Shenzhen electronic experts, has a domestic LED lighting research and development team.
3. Philips Philips (China) Investment Co., Ltd., founded in the Netherlands in 1891 to produce electric light bulbs, is a provider of Smart + connected LED lighting solutions whose ultra-high voltage palace lamps have revolutionized the history of lighting. The Chinese art.
4. Which manufacturers of led fluorescent lamps are better generally, those of Jiangsu Yuexin Lighting and Shenzhen Darong Optoelectronics will be better. The former is a high-tech enterprise specializing in R & D, production, sales and engineering services of led packaging and lighting.
