How to do well Lighting Design
A good mixed lighting method can do this: increase area illuminance, reduce shadows and light spots on the working face, obtain higher illuminance on vertical and inclined planes, reduce the total power of lighting facilities, and save energy. The utility model is suitable for common home decoration areas such as restaurants, living rooms and so on.
The design of night scene lighting, combined with space size, surrounding environment layout, local functional requirements, as well as bright and dark lights and tones and other conditions, will make elaborate design arrangements to add unlimited visual beauty to the whole space environment. It will also improve the quality of night lighting design.
Define the purpose and purpose of lighting facilities. Determine the appropriate illuminance. Lighting quality. Select the light source. Determine the lighting mode. Selection of illuminators (lamps and lanterns). Determination of the location of the illuminator. Electrical design. Maintenance and protection. Matters that should be considered in the design.
Lighting design
Lighting methods we can combine different lighting methods, such as internal light transmission lighting design, projection lighting design, special lighting design, can enhance the lighting effect of different buildings on each side, and better increase the hierarchical sense of the building.
Lighting design natural light source in the home lighting design, for the collection and use of natural light is very critical, especially if you have a large house facing south, the floor-to-ceiling window is definitely your best choice.
Lighting design can be carried out in the following steps. ① determines the design illuminance. According to the requirements of the visual function of each room and the cleanliness of the indoor environment, and according to the relevant lighting standards, the illuminance of each room or place (minimum illuminance for industry and average illuminance for civil use) and illuminance compensation coefficient are determined. ② chooses the lighting method.
The principle of safety of indoor lighting design no matter what occasion safety should be the first, so indoor lighting design needs to ensure absolute safety, and do a good job to prevent electric shock, prevent short circuit and other measures, in strict accordance with the standard construction to prevent accidents.
What are the lighting design principles of interior drawings? The relationship between overall lighting and local lighting people are accustomed to a room with general lighting “main lamp”, mostly with chandelier or ceiling lamp installed in the center of the room.
Establish contact, understand customer needs in this link, customers and suppliers to establish a preliminary relationship (provided that the business relationship has been basically established). The direct owner or client (such as a decoration company that lacks lighting design capacity) confesses to the lighting designer or lighting design company and states his needs and intentions to the lighting designer.
What are the lighting fixtures used in the factory workshop and how to design them?
1, W high sodium lamp or 112W LED lamp, hang in the middle of the workshop, hang one every 13 meters, absolutely meet the needs. 250W high sodium lamp actual 300W LED lamp actual power 122W, power saving 60%, but the unit price is more than 4 times higher. Life expectancy is more than 5 times longer and the whole life cost is low, but you have to spend more money at first, so it’s up to you to choose.
2. The selection of lamps and lanterns in general industrial buildings (1) Open lamps are generally used in normal ambient temperature (heating or non-heating places). (2) generally choose Sichuan dustproof lamps and lanterns for places that contain a lot of dust but have no danger of explosion and fire.
3. The type of lamp should be determined according to the ceiling height of the factory. For those with a ceiling below 4m, it is recommended to install LED flat panel lights or LED grille lights, and for those with no ceiling, it is recommended to install suspended LED lamps with supports; for those with a height above 4m, it is recommended to install LED industrial and mining lamps or factory lights with a larger luminous angle.
4. According to one lamp, the lighting range is about 65 square meters, and 110 sets of lights are required. About 11KW, calculation current 55A, total empty turn on 60A, below is divided into 4 loops, each circuit hangs 28 sets of lights, divides into empty turns on 20A.
5, the higher part of the workshop can use LED spotlight, LED industrial and mining lamp, lower place can use LED three anti-lamp (waterproof, dustproof, anticorrosive), need explosion-proof condition to use LED explosion-proof lamp.
6. General industrial and mining lighting has the forms of ceiling, embedding, hoisting (using straight pipe or chain) and suction wall, etc. The movable local lighting lamp is equipped with corresponding hooks, handles, pins, etc.; the fixed local lighting lamp is generally firmly locked on the working machine with screws or fixing mechanism.
Workshop lighting design
Press 1 lamp to illuminate a range of about 65 flat, to 110 sets of lights. About 11KW, calculation current 55A, total empty turn on 60A, below is divided into 4 loops, each circuit hangs 28 sets of lights, divides into empty turns on 20A.
The design of lighting wiring in dust-free workshop should follow the principle of “concealment” like all kinds of electrical circuits and professional pipes.
W high sodium lamp or 112W LED lamp, hang in the middle of the workshop, hang one every 13 meters, absolutely meet the needs. 250W high sodium lamp actual 300W LED lamp actual power 122W, power saving 60%, but the unit price is more than 4 times higher.
Shanghai Exhibition Design and Construction Company
1. Shanghai Chuangxin Exhibition Design and production Co., Ltd. also has its own factory and design team, and has participated in the overall design and construction of the Indonesian Pavilion at the World Expo. Shanghai Ambrose is also a German-funded enterprise, which is also very good. There are many display companies like this.
2. Shanghai Yile Decoration Design Co., Ltd. is a professional decoration enterprise integrating design and construction.
3. Shanghai Aushuo Exhibition Co., Ltd. Shanghai Aushuo Exhibition Co., Ltd. is a domestic exhibition service company, which is located in Huangpu District, Shanghai. Shanghai Aushuo Convention and Exhibition Co., Ltd. is mainly engaged in exhibition service, conference service, architectural decoration and construction engineering design and construction.
4. Shanghai Lizhan Exhibition Design and Engineering Co., Ltd. was established in 1998, mainly engaged in large-scale exhibition project planning and design, project management, project implementation, technical research and development services, including museums, urban planning halls, science and technology pavilions, school history pavilions, enterprise pavilions and other exhibition hall design and construction services.
How should the lighting of the office station be designed?
First, as a workplace, the lighting should be uniform, and the focusing performance of spotlights obviously cannot be satisfied; second, the lighting of spotlights is too dazzling, which can easily affect the eyesight of employees.
In the layout of lamps and lanterns, also try to fit the natural light, in the lighting source lighting should be combined with uniformity, comfort as the design principle, the layout of all surfaces as uniform lighting as possible, in order to smoothly carry out visual work.
The lighting of the office is suitable for fluorescent lamps, which are installed on both sides of the work area. The longitudinal axis of the fluorescent lamps is parallel to the horizontal line of sight, and the lamps and lanterns must not be arranged directly in front of the working position.
