How to disassemble the lamp?
Most lamps and lanterns can be removed directly by hand. When removing the lamps and lanterns, you need to operate in reverse order. If you want to remove the lampshade, you need to find the screws or clasps first, and then untie them in order. If you cannot disassemble the lamp by hand, you can use the tool.
If it is an embedded ceiling lamp, if it is an embedded ceiling lamp, first disconnect the power supply, find the position of the buckle, then press the buckle and remove the lampshade, you can replace the internal lamps and lanterns. If it is an ordinary ceiling lamp, first disconnect the power supply, then remove the iron ring of the fixed lampshade, and then remove the lampshade to replace the lamp.
First of all, cut off the power, find a herringbone ladder, rotate the screw on the lampshade with a tool, and remove the lampshade first. Then find the connection and cut the power cord of the lamp with scissors. If the ceiling lamp is fixed to the ceiling, there must be screws. Remove the screws, or loosen the ceiling buckle plate and remove it.
First of all, to turn off the power to prevent electric shock; prepare ladders, use tools to unscrew the top of the lampshade, remove the lampshade; find the connection, cut off the power cord of the lamp, if the ceiling lamp is fixed in the ceiling, there are screws inside, as long as the screw is removed, or the ceiling buckle plate can be removed.
Lighting installation method Lighting fixture installation-how to disassemble the lamp first check whether the old lamp is broken. In general, the section that uses a longer lamp will appear gray. We should know that this is caused by the condensation of a substance inside the lamp tube in a high temperature environment.
How to remove the downlight
How to remove the downlight is generally directly twisted the radiator with the face ring on it, the lamp board is fixed on the radiator with screws. Downlights generally have a screw lamp holder, which can be directly installed with incandescent lamps or energy-saving lamps. Downlight is a kind of lighting fixture embedded in the ceiling.
How to remove the downlight? Make a hole in the ceiling according to the size and installation position of the downlight. How to remove the downlight? Connect the reserved power cord in the chandelier with the downlight.
Remove the downlight bulb to prevent it from breaking during disassembly. According to the above downlight installation method, it can be known that the downlight is fixed by spring clip and barbed hook, so as long as the downlight is pulled down vigorously. Disconnect the downlight from the power cable, and then replace the new downlight according to the above installation method.
How to remove the Downlight Brand
1. The specific steps of how to disassemble the downlight. When installing the downlight, don’t get too close to the wall. Attention, everyone. Downlight will generate heat when lighting, if it is too close to the wall, it will bake the wall yellow, affecting the beauty of the interior.
2. Open the hole, draw the line and open the hole on the ceiling according to the size and installation position of the downlight. How to remove the downlight? Connect the reserved power cord in the chandelier with the downlight. How to remove the downlight? Adjust, adjust the downlight fixed Reed butterfly nut, how to remove the downlight? Make the height of the Reed the same as the thickness of the chandelier.
3. The way to disassemble the downlight is to cut off the power supply at home first. Screw off the light bulb by hand so as not to break it during disassembly. The downlight is generally fixed with a spring snap barb, which can be removed as long as the downlight is pulled down hard. Cut the connection between the downlight and the power supply, and the downlight can be removed.
