Is it easy to change when the line light is broken?
1, the linear lamp is broken to replace the specific use of the following operating methods: first disconnect the power supply, and then take the electric pen to detect the existence of electricity in the wire, so as to avoid the danger of electric shock. There is a small hole in the ceiling where construction is needed, which can facilitate the setting of linear lights, and the size of the hole is determined according to the specifications of the lamp strip.
2. Linear lights are not easy to break. As a decorative lamp, the effect of color is a very important thing, and from the LED linear lamp this product can realize that the product can achieve the collocation of 16 million colors, so it can be better enriched for many aspects of color effect.
3. No. Linear lights are special structure, most of them are composed of LED lights, the life of LED is relatively long, please rest assured to buy, bold use. I hope to adopt it.
4. It depends on which light line is broken. If the light line on the shed is broken, then if you don’t know how to repair it, you can’t replace it yourself. Because the light line on the shed must pull out the original thread inside and put on a new one.
5. The honeycomb strip lamp is not easy to break. Line lamp series is a kind of high-end flexible decorative lamp, which is characterized by low power consumption, long life, high brightness, easy to bend, maintenance-free and so on. It is especially suitable for indoor and outdoor entertainment, building outline drawing and billboard production.
Appearance and installation of linear lamp grooves
1. We need to turn off the switch before construction. According to the size specification of the linear lamp groove, the cutting machine is used to slot the plasterboard of the ceiling. Put the lamp slot into the plasterboard and secure it with screws. Scrape the plasterboard putty and paint from the ceiling. Stick the lamp belt on the lamp slot and install the luminous mask.
2. In the next step, we connect the driver wire and the power cord of the linear lamp, and then connect the linear lamp wire to the driver wire connection port. Finally, we pasted the grid cloth on the scales on both sides of the lamp slot and scratched the putty to cover it.
3. Linear lamp slot is usually a long strip of decorative lamps and lanterns, which can be used for indoor or outdoor decorative lighting. Its shape is usually rectangular or round, and the material can be metal, plastic or glass. The installation of linear light grooves usually needs to be fixed on the wall or ceiling and can be installed by means of screws or glue.
4. Linear lamps are mainly composed of inverters (mainly 24V or 12 Ⅴ), linear lamp slots (various sizes and shapes can be customized) and LED luminous patches. The installation mode of linear lamp is embedded, which is basically similar to that of titanium alloy bar.
5. First determine the length to be installed, and then take the 10cm light belt to intercept. Secondly, connect the positive and negative electrodes of the lamp. Finally, the 10cm lamp belt will be arranged and leveled, and then put into the lamp slot.
I don’t want the linear light slot. Can you fill it out?
If you don’t want the lamp slot, you can seal it with a plasterboard, and then install the lamp belt on the plasterboard, which can prevent ash accumulation and make it easy to clean up. When decorating, I may still think that this lamp is too beautiful, but because I did not take into account the practicality and the difficulty of cleaning, I found that I still have to change the practical lamps and lanterns after a period of time in life.
The remedies for the ceiling light trough in the living room are as follows: the ceiling is next to the chandelier. If there is a grotto, it will be very ugly and we can make it up. Go to the building materials market to buy a bag of fast-sticking gypsum powder and stir it with water according to the instructions. Next, fill the quick-stick gypsum powder into the dust of the cave and plug the hole.
No. Linear lamp slot installation needs to take up plane space, will highlight the plane 3mm to 6mm, is not flat. Linear lamp is a kind of lamps and lanterns that have a great sense of shape and can adapt to a variety of household conditions, and soft light has become the first choice for everyone to create an atmosphere.
I don’t need it. If you stick it with glue, you will leave a groove on the top to glue the metal strip, and the gap in the slot is similar to that of the metal strip. Keep a piece of wood in the slot to fix it. The metal strip card is usually flat after the installation of the grooved lamp.
The linear lamp slot is not satisfied with a new set of stickers. The main reason is that the size does not fit, just choose the appropriate lamp slot.
Do you need glue for the installation of line lights?
1, plasterboard ceiling line lamp installation, structural glue installation steps are as follows: preparation: before starting the installation, please make sure that your plasterboard ceiling has been installed, and installed lines and required lighting equipment. Select structural adhesive: select the appropriate structural adhesive. Generally speaking, it is recommended to use strong two-component structural adhesive.
2. Before installation, you need to prepare the linear lamps to be installed, and at the same time determine the specific installation location of the alcohol repellent line lights. Fix the linear lamps and lanterns on the wine cabinet with screws and tighten the screws with a screwdriver. The wine cabinet is the electronic wine cabinet which uses the semiconductor refrigeration chip as the electric cooling system.
3. Get ready to install the necessary props, such as line lights, power supply, flexible cord, glass glue. Determine the location of the line lamp installation. Connect the L column of the lamp to the fire line and the N column to the zero line. The positive pole of the power supply is connected to the red wire, and the negative pole of the power supply is connected to the black line. Fix the line lamp with glass glue.
4. The installation of LED line lights in the room is very simple. The back of each LED line lamp is affixed with self-adhesive 3M double-sided adhesive. During installation, you can directly tear off the sticker on the surface of 3M double-sided glue, then fix the lamp strip where you need to install it, and press it flat with your hand.
5. First of all, it is stable to be fixed with 3M glue. Secondly, the silicone linear lamp belt is generally fixed with 3M glue. Finally, combined with the lamp with clip fixed, so as to ensure a firm.
6. ① positive corner splicing: the convex corner of the wall. ② corner splicing: the concave corner of the wall corner. ③ flat angle stitching: the same horizontal plane.
What if the cover of the bright linear lamp slot is loose?
AB glue. Linear lamp slot with 109AB metal glue is a two-component glue, according to the ratio of 1: 1, 3 to 5 minutes can be cured, 1 hour can reach the maximum strength, so that the lamp belt becomes very strong.
The linear lamp slot is not satisfied with a new set of stickers. The main reason is that the size does not fit, just choose the appropriate lamp slot.
Plug connection plug outlet is an outlet hole from the middle of the plug sheet at both ends of the LED linear lamp, which is very convenient to install, the plug outlet can not be seamlessly connected, and its aesthetics is slightly inferior to that of the bottom outlet.
If you don’t want the lamp slot, you can seal it with a plasterboard, and then install the lamp belt on the plasterboard, which can prevent ash accumulation and make it easy to clean up. When decorating, I may still think that this lamp is too beautiful, but because I did not take into account the practicality and the difficulty of cleaning, I found that I still have to change the practical lamps and lanterns after a period of time in life.
No, I won’t. As long as the lamp is fixed to prevent it from falling off, the line lamp refers to welding the LED lamp on the copper wire or ribbon flexible circuit board with special processing technology, and then connecting the power supply to glow, which is named because it is shaped like a light band when it glows.
I don’t need it. If you stick it with glue, you will leave a groove on the top to glue the metal strip, and the gap in the slot is similar to that of the metal strip. Keep a piece of wood in the slot to fix it. The metal strip card is usually flat after the installation of the grooved lamp.
