How much power is needed for lighting in a 3000 square factory building?
1. The lighting of the factory building is about 3 watts per square meter. If a lamp is used in a 300-square-meter factory building, it will use about 500 to 800 watts, so the lighting is not uniform enough, so you can generally use 10 lights, one lamp is 50 to 80 watts, so the lighting of the factory building is about 3 watts per square meter.
2. According to the limited data provided by the landlord, it can only be determined with reference to the following ways. Workshop general lighting unit area installation power is: 5W/mm2-12W/mm2. The lighting estimation method is calculated according to the unit capacity: W=P/S (W is the installation power per unit area, S is the room area, P is the total installation power of all light sources).
3. If it is a factory building, the requirement for desktop illuminance is usually within 200LUX, the height of 5 meters is a lower height, there is no need for industrial and mining lamps, ceiling lights and grille lights can be used. The power of LED lamp is about 50W. The factory building of 300 square meters can be one every 5 to 5 meters. Twelve is enough.
Lighting per square power of factory building
1. To 500 watts. General lighting is 3 to 5 watts per square meter, and 100 square meters is 300 to 500 watts. Lighting quality is a symbol to measure the quality of factory lighting design.
2. About watts. Factory lighting from the types of light sources, there are traditional metal halide lamps, sodium lamps, energy-saving lamps, new light sources are LED, induction lamps and so on. The price of traditional light source is cheap, but its service life is short and electricity is consumed.
3. The workshop lighting is 200 watts per square meter. According to the query related information, the workshop lighting should be calculated according to the lighting requirements of the workshop, and the workshop lighting requirements are low, 200 watts per square meter is enough.
4. According to the limited data provided by the landlord, it can only be determined with reference to the following ways. Workshop general lighting unit area installation power is: 5W/mm2-12W/mm2. The lighting estimation method is calculated according to the unit capacity: W=P/S (W is the installation power per unit area, S is the room area, P is the total installation power of all light sources).
How much power are the workshop lights?
Generally speaking, they are 40W fluorescent lamps, but the actual electricity consumption and nominal power consumption are different. The power consumption is more when the voltage is high and less when the voltage is low. Assuming that the voltage is 220V, the power consumption of fluorescent lamp brackets will vary from brand to brand. The actual electricity consumption is between 20 and 35W.
The workshop is illuminated by 200 watts per square meter. According to the query related information, the workshop lighting should be calculated according to the lighting requirements of the workshop, and the workshop lighting requirements are low, 200 watts per square meter is enough.
We have two kinds of energy-saving lamps, one is the strip energy-saving lamp that replaces the T8 fluorescent lamp, which is only 18w, which saves 10w more than the other T528w energy-saving lamps on the market, and the quality is guaranteed for 3 years / 10000 hours. This is used for close-up lighting.
Which T8 fluorescent lamp shade is good?
1. Baiqianhui Lighting Factory, Guzhen Town, Zhongshan City, Guangdong Province, was established in 2009, is a professional manufacturer of LED/T8/T5 fluorescent lamps.
2. Foshan lighting classic is good. The difference between Foshan lighting classic series and Jingying series is as follows. According to the relevant information query, Jingying series lamps have the advantages of high power, high brightness, eye protection, good stability and high chromaticity, etc. Foshan lighting products are of good quality, but a series and a series of technical parameters are different.
3. T8LED fluorescent lamp is a kind of LED fluorescent lamp with a diameter of 5 inch and a diameter of about 16mm.
4, if you want to play this size of the cylinder for a long time, this is the first choice, such DIY light panel, red grass and green grass are suitable, but the early investment is relatively large, long-term play, is the most economical. I’m afraid LZ won’t play with this size halfway. This picture is obviously a lamp panel of clear water and wind. The advantages are economical and affordable, but the disadvantages are shallow.
